Also can you help me with what the best ways to put flames on the fenders. It looked great and stuck perfectly, but had it professionally redone to add my hard top and freedom panels in to the color scheme. Note: Do not remove paint from the Fender Flare before re-painting. Step 1. Never use a paint stripper, as it will ruin the flare by soaking into the plastic and causingthe next coat of paint to peel off. Apply heat at a longer distance of 1 foot to gently warm the area. But do it right, and the fenders make a great wide surface for customization! To remove any dust or sand left, wipe the fender thoroughly inside in out with a tack cloth. The Single Axle Trailer Fender w Top Step - Style B - Black Plastic - 8" to 12" Wheels - Qty 1 # F008559 can be painted, but there is some work to do with painting plastic as you stated. I want to paint them black with maybe some flames on the fenders. Nick A. Apply another coat of paint. Apply 1 coat of polypropylene primer. Painting Process. Let it dry. This is how I painted my plastic fender flares. Apply your paint to the fender flare. The preparation phase is one of the most important parts of the job if you want the paint to last. Before you start, make sure that you have a well Use 200 grit sand paper to sand the surface of the flare. The best thing to do is to just leave the paint on the Fender Flares. Log in or Sign up. When completely dry, wipe the fender once again with a tack cloth. Work on the surface with some light sanding, primer and repaint of your flares. Correspondingly, how do you paint plastic fenders? Flexible plastic like that used in the S-1 fenders can be tricky to paint. I'm 15 and got this ATC with dull paint or plastic. I originally did mine with Krylon Plastic spray cans. Let dry. DODGE RAM FORUM - Dodge Truck Forums. Because you wont be able to paint it once the fender is mounted on the car, spray paint the interior beforehand. I was just wondering if I can use regular spray paint on my 1985 ATC 250es Big Red fenders. The Krylon Spray Paint should be fairly easy to use as it has a 360 degree dial spray tip, which will mean youll be able to get into any corners and grooves easily. It takes technique to know when to stop applying heat. Adhesion promoter is necessary because plastic is a petroleum-based product that paint has difficulty sticking to - especially given the fact that plastic bumper covers are flexible. To paint it so it won't peel, you will need to wet sand it to scratch up the finish so it can hold paint. All of Paint Thinner and Boiled Linseed Oil. Treat the surface of the flare with an adhesion promoter. You also need to use the right products to ensure they stick well to plastic without bubbling or If you heat gun has multiple settings, start with the lowest heat first. To ensure that the paint will stick to the plastic parts, you'll need to take a few extra steps and combine some additives into your paint. 2. Painting plastic and getting the paint to stay can be challenging. Prep work is 90% of all paint jobs, and on plastic the correct primer. You may wish to hang the plastic fenders and body parts up somewhere so you improve your access, and having the parts at a slight angle can actually help to cure the paint. Do it wrong, and the paint flakes right off. TriNova Plastic Restorer Test this method on the under side of a fender or somewhere with low visibility. Painting plastic motorcycle parts is different than painting metal parts because of the difference in the surfaces. Mist or dust the first coat of paint onto the flare. Here's how to paint your Super 73 fenders the right way with paints and material we offer at Custom73.com. I would appreciate this very much thank you.